LOW SAP ALARM with BURNER STOP

This electronic low water detector provides an audible and visual alarm when the sap or syrup level drops below a preselected point. It can also stop the burner when that point is reached. The alarm clips onto the side of the pan, float box or sight tube and a stainless steel probe is inserted into the sap or syrup to the desired depth. The burner control is wired to the alarm by a connector which is supplied. A blinking red light flashes and the alarm sounds when the sap or syrup level drops below the bottom of the probe. After 11 seconds, the burner is stopped and the yellow light goes out.

A ground strap with alligator clips at both ends enables the alarm to be installed on the sight tube.

The alarm plugs into a 110 vac outlet.

The alarm comes with a two year warranty.

LOW SAP ALARM with BURNER STOP

This electronic low water detector provides an audible and visual alarm when the sap or syrup level drops below a preselected point. It can also stop the burner when that point is reached. The alarm clips onto the side of the pan, float box or sight tube and a stainless steel probe is inserted into the sap or syrup to the desired depth. The burner control is wired to the alarm by a connector which is supplied. A blinking red light flashes and the alarm sounds when the sap or syrup level drops below the bottom of the probe. After 11 seconds, the burner is stopped and the yellow light goes out.

A ground strap with alligator clips at both ends enables the alarm to be installed on the sight tube.

The alarm plugs into a 110 vac outlet.

The alarm comes with a two year warranty.

LOW SAP ALARM with BURNER STOP

This electronic low water detector provides an audible and visual alarm when the sap or syrup level drops below a preselected point. It can also stop the burner when that point is reached. The alarm clips onto the side of the pan, float box or sight tube and a stainless steel probe is inserted into the sap or syrup to the desired depth. The burner control is wired to the alarm by a connector which is supplied. A blinking red light flashes and the alarm sounds when the sap or syrup level drops below the bottom of the probe. After 11 seconds, the burner is stopped and the yellow light goes out.

A ground strap with alligator clips at both ends enables the alarm to be installed on the sight tube.

The alarm plugs into a 110 vac outlet.

The alarm comes with a two year warranty.